Ericsson ECN330 - Spanning-Tree Transmission-Limit; Spanning-Tree Mst-Configuration

Command Line Interface
804 1553-KDU 137 365 Uen D 2006-06-16
7.15.8 spanning-tree transmission-limit
This command configures the minimum interval between the transmission of
consecutive RSTP/MSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit <count>
no spanning-tree transmission-limit
count -The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
7.15.9 spanning-tree mst-configuration
This command changes to Multiple Spanning Tree (MST) configuration mode.
Default Setting
• No VLANs are mapped to any MST instance.
• The region name is set the ECN330-switch’s MAC address.
Console(config)#spanning-tree transmission-limit 4
Console(config)#