Command Line Interface
8051553-KDU 137 365 Uen D 2006-06-16
Command Mode
Global Configuration
Example
Related Commands
mst vlan (section 7.15.10 on page 805)
name (section 7.15.12 on page 807)
revision (section 7.15.13 on page 808)
max-hops (section 7.15.14 on page 809)
7.15.10 mst vlan
This command adds VLANs to a spanning tree instance. Use the no form to
remove the specified VLANs. Using the no form without any VLAN parameters
to remove all VLANs.
Syntax
[no] mst <instance_id> vlan <vlan-range>
• instance_id - Instance identifier of the spanning tree.
(Range: 0-4094)
• vlan-range - Range of VLANs. (Range: 1-4094)
Default Setting
none
Command Mode
MST Configuration
Console(config)#spanning-tree mst-configuration
Console(config-mstp)#
To Next Page
Loading...
