Command Line Interface
1132 1553-KDU 137 365 Uen D 2006-06-16
Example
7.27.27 show ip pim neighbor
This command displays information about PIM neighbors.
Syntax
show ip pim neighbor [ip-address]
ip-address - IP address of a PIM neighbor.
Default Setting
Displays information for all known PIM neighbors.
Command Mode
Normal Exec, Privileged Exec
Console#show ip pim interface 1
Vlan 1 is up
PIM is enabled, mode is Dense.
Internet address is 10.1.0.253.
Hello time interval is 30 sec, trigger hello time interval is 5
sec.
Hello holdtime is 105 sec.
Join/Prune holdtime is 210 sec.
Graft retry interval is 3 sec, max graft retries is 2.
DR Internet address is 10.1.0.254, neighbor count is 1.
Console#sh ip pim interface 2
Vlan 1 is up
PIM is enabled, mode is Sparse.
Internet address is 192.168.1.250.
Hello time interval is 40 sec, trigger hello time interval is 5
sec.
Hello holdtime is 105 sec.
DR priority is 1.
DR Internet address is 0.0.0.0, neighbor count is 0.
Console#
To Next Page
Loading...
