EasyManuals Logo

Ericsson ECN330 User Manual

Ericsson ECN330
1226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1083 background imageLoading...
Page #1083 background image
Command Line Interface
10771553-KDU 137 365 Uen D 2006-06-16
all the network routers have been updated with the new key, the old key
should be removed for security reasons.
Example
This example sets a message-digest key identifier and password.
Related Commands
ip ospf authentication (section 7.26.32 on page 1073)
7.26.35 ip ospf cost
This command explicitly sets the cost of sending a packet on an interface. Use
the no form to restore the default value.
Syntax
ip ospf cost <cost>
no ip ospf cost
cost - Link metric for this interface. Use higher values to indicate slower
ports. (Range: 1-65535)
Command Mode
Interface Configuration (VLAN)
Default Setting
1
Console(config)#interface vlan 1
Console(config-if)#ip ospf message-digest-key 1 md5 aiebel
Console(config-if)#

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ericsson ECN330 and is the answer not in the manual?

Ericsson ECN330 Specifications

General IconGeneral
BrandEricsson
ModelECN330
CategoryNetwork Router
LanguageEnglish

Related product manuals