Ericsson ECN330 - Show Mac Access-List

Command Line Interface
7111553-KDU 137 365 Uen D 2006-06-16
Command Usage
• New rules are added to the end of the list.
• The ethertype option can only be used to filter Ethernet II formatted
packets.
• A detailed listing of Ethernet protocol types can be found in RFC 1060.
A few of the more common types include the following:
• 0800 - IP
• 0806 - ARP
• 8137 - IPX
Example
This rule permits packets from any source MAC address to the destination
address 00-e0-29-94-34-de where the Ethernet type is 0800.
Related Commands
access-list mac (section 7.8.10 on page 708)
7.8.12 show mac access-list
This command displays the rules for configured MAC ACLs.
Syntax
show mac access-list [acl_name]
acl_name – Name of the ACL. (Maximum length: 16 characters)
Command Mode
Privileged Exec
Console(config-mac-acl)#permit any host 00-e0-29-94-34-de ethertype
0800
Console(config-mac-acl)#