Command Line Interface
954 1553-KDU 137 365 Uen D 2006-06-16
Example
Related Commands
ip igmp snooping (section 7.21.1 on page 936)
show ip igmp snooping (section 7.21.5 on page 940)
7.21.16 ip igmp robustval
This command specifies the robustness (expected packet loss) for this interface.
Use the no form of this command to restore the default value.
Syntax
ip igmp robustval <robust-value>
no ip igmp robustval
robust-value - The robustness of this interface. (Range: 1-255)
Default Setting
2
Command Mode
Interface Configuration (VLAN)
Console(config)#interface vlan 1
Console(config-if)#ip igmp
Console(config-if)#end
Console#show ip igmp interface
Vlan 1 is up
IGMP is enable, version is 2
Robustness variable is 2
Query interval is 125 sec
Query Max Response Time is 10 sec, Last Member Query Interval is 1
sec
Querier is 10.1.0.253
Console#
To Next Page
Loading...
