Command Line Interface
940 1553-KDU 137 365 Uen D 2006-06-16
(section 7.21.10 on page 946) and ip igmp snooping query-
interval (section 7.21.9 on page 945).
•The ip igmp snooping querier command (section 7.21.7 on page
943) cannot be enabled when using IGMPv3 snooping.
Example
The following configures the ECN330-switch to use IGMP Version 1:
7.21.5 show ip igmp snooping
This command shows the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Configuring IGMP Snooping and Query Parameters” on page 355 for
a description of the displayed items.
Console(config)#ip igmp snooping version 1
Console(config)#
To Next Page
Loading...
