Command Line Interface
9511553-KDU 137 365 Uen D 2006-06-16
Example
The following shows how to configure port 11 as a multicast router port within
VLAN 1:
7.21.14 show ip igmp snooping mrouter
This command displays information on statically configured and dynamically
learned multicast router ports.
Syntax
show ip igmp snooping mrouter [vlan <vlan-id>]
vlan-id - VLAN ID (Range: 1-4094)
Default Setting
Displays multicast router ports for all configured VLANs.
Command Mode
Privileged Exec
Command Usage
Multicast router port types displayed include Static or Dynamic.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#
To Next Page
Loading...
Need help?
General
