Command Line Interface
10991553-KDU 137 365 Uen D 2006-06-16
7.26.45 show ip ospf neighbor
This command displays information about neighboring routers on each interface
within an OSPF area.
Syntax
show ip ospf neighbor
Command Mode
Privileged Exec
State Disabled – OSPF not enabled on this interface
Down – OSPF is enabled on this interface, but
interface is down
Loopback – This is a loopback interface
Waiting – Router is trying to find the DR and BDR
DR – Designated Router
BDR – Backup Designated Router
DRother – Interface is on a multiaccess network, but
is not the DR or BDR
Priority Router priority
Designated
Router
Designated router ID and respective interface
address
Backup
Designated
Router
Backup designated router ID and respective interface
address
Timer intervals Configuration settings for timer intervals, including
Hello, Dead and Retransmit
Field Description
To Next Page
Loading...
