Command Line Interface
11611553-KDU 137 365 Uen D 2006-06-16
7.27.44 show ip pim
This command shows the global settings for PIM-SM.
Command Mode
Privileged Exec
Example
This example displays the global settings for PIM-SM.
Table 154 show ip pim - Display Description
Console#show ip pim
PIM-DM Admin Status: Disabled
PIM-SM Admin Status: Enabled
Join/Prune-Interval: 60
Register-Suppression: 500
Register-Rate-Limit: 500
Register-CheckSum-with Data: Enabled
Ignore RP-Set-Priority: Enabled
CRP-Prefix: Enabled
SPT-Threshold: Enabled
SPT-Threshold Group: 224.1.0.0
SPT-Threshold Group mask: 255.255.0.0
Console#
Field Description
PIM-DM Admin
Status
Shows if PIM-DM is enabled
PIM-SM Admin
Status
Shows if PIM-SM is enabled
Join/Prune-
Interval
Frequency at which this router sends Join/Prune
messages for the multicast groups it is forwarding
Register-
Suppression
Value of the register suppression timer on a DR or the
keep alive time on an RP
To Next Page
Loading...
