Command Line Interface
1160 1553-KDU 137 365 Uen D 2006-06-16
Related Commands
show ip pim interface (section 7.27.26 on page 1131)
7.27.43 clear ip pim bsr rp-set
This command clears the RP entries learned through the BSR.
Command Mode
Privileged Exec
Command Usage
This command can be used to update the entries in the static multicast
forwarding table immediately after making configuration changes to the RP.
Example
This example clears the RP map.
Related Commands
show ip pim rp mapping (section 7.27.46 on page 1165)
Console#clear ip pim bsr rp-set
Console#sh ip pim rp mapping
PIM Group-to-RP Mappings:
Console#
To Next Page
Loading...
