Ericsson ECN330 - Show Mac-Address-Table

Command Line Interface
7891553-KDU 137 365 Uen D 2006-06-16
7.14.3 show mac-address-table
This command shows the classes of entries in the bridge-forwarding database.
Syntax
show mac-address-table [address <mac-address> [mask]]
[interface <interface>] [vlan <vlan-id>]
[sort {address | vlan | interface}]
• mac-address - MAC address.
• mask - Bits to match in the address.
• interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330
(Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
• vlan-id - VLAN ID (Range: 1-4094)
• sort - Sort by address, vlan or interface.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following types:
• Learned - Dynamic address entries
• Permanent - Static entry