Ericsson ECN330 - Show History

Command Line Interface
534 1553-KDU 137 365 Uen D 2006-06-16
7.4.3 configure
Use this command to activate Global Configuration mode. This mode must be
entered to modify any settings on the ECN330-switch. Also, Global
Configuration mode must be entered prior to enabling some of the other
configuration modes, including Interface Configuration, Line Configuration, and
VLAN Database Configuration. See section 7.2.8 on page 521.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
end (section 7.4.7 on page 537)
7.4.4 show history
Use this command to show the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#configure
Console(config)#