Ericsson ECN330 - Page 539

Command Line Interface
5331553-KDU 137 365 Uen D 2006-06-16
7.4.2 disable
Use this command to return to Normal Exec mode from privileged mode. In
normal access mode, only basic information on the ECN330-switch's
configuration or Ethernet statistics can be displayed. To gain access to all
commands, the privileged mode must be used. See section 7.2.8 on page 521.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The > character is appended to the end of the prompt to indicate that the
system is in normal access mode.
Example
Related Commands
enable (section 7.4.1 on page 532)
Console#disable
Console>