Ericsson ECN330 - Show Interfaces Protocol-Vlan Protocol-Group

Command Line Interface
8811553-KDU 137 365 Uen D 2006-06-16
Default Setting
All protocol groups are displayed.
Command Mode
Privileged Exec
Example
This shows protocol group 1 configured for IP over Ethernet:
7.17.25 show interfaces protocol-vlan protocol-group
This command shows the mapping from protocol groups to VLANs for the
selected interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
• unit - This is device 1.
• port - Port number.
• port-channel <channel-id> (Range: 1-13)
Default Setting
The mapping for all interfaces is displayed.
Console#show protocol-vlan protocol-group
ProtocolGroup ID Frame Type Protocol Type
------------------ ------------- ---------------
1 ethernet 08 00
Console#