Command Line Interface
9531553-KDU 137 365 Uen D 2006-06-16
7.21.15 ip igmp
This command enables IGMP on a VLAN interface. Use the no form of this
command to disable IGMP on the specified interface.
Syntax
[no] ip igmp
Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)
Command Usage
IGMP query can be enabled globally at Layer 2 through the ip igmp
snooping command, or enabled for specific VLAN interfaces at Layer 3
through the ip igmp command. (Layer 2 query is disabled if Layer 3 query
is enabled.)
clear ip igmp
group
Deletes entries from the IGMP cache PE 960
show ip igmp
groups
Displays detailed information for IGMP groups NE, PE 961
Command Function Mode Page
To Next Page
Loading...
