Command Line Interface
11151553-KDU 137 365 Uen D 2006-06-16
because only the default upstream interface can forward multicast traffic
from an unknown source.
Example
7.27.10 ip dvmrp
This command enables DVMRP on the specified interface. Use the no form to
disable DVMRP on this interface.
Syntax
[no] ip dvmrp
Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)
Command Usage
To fully enable DVMRP, multicast routing needs to be enabled globally for
the router with the ip multicast-routing command (page 1104),
DVMRP enabled globally for the router with the router dvmrp command
(page 1108), and also DVMRP enabled for each interface that will
participate in multicast routing with the ip dvmrp command.
Console(config-router)#default-gateway 10.1.0.253
Console(config-router)#
To Next Page
Loading...
