Ericsson ECN330 - Ip Name-Server

Command Line Interface
968 1553-KDU 137 365 Uen D 2006-06-16
Example
This example adds two domain names to the current list and then displays the
list.
Related Commands
ip domain-name (section 7.22.3 on page 966)
7.22.5 ip name-server
This command specifies the address of one or more domain name servers to
use for name-to-address resolution. Use the no form to remove a name server
from this list.
Syntax
[no] ip name-server <server-address1> [<server-address2>
… <server-address6>]
• server-address1 - IP address of domain-name server.
• server-address2 … server-address6 - IP address of
additional domain-name servers.
Default Setting
None
Console(config)#ip domain-list sample.com.jp
Console(config)#ip domain-list sample.com.uk
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
.sample.com
Domain Name List:
.sample.com.jp
.sample.com.uk
Name Server List:
Console#