Command Line Interface
10971553-KDU 137 365 Uen D 2006-06-16
7.26.44 show ip ospf interface
This command displays summary information for OSPF interfaces.
Syntax
show ip ospf interface [vlan <vlan-id>]
vlan-id - VLAN ID (Range: 1-4094)
Command Mode
Privileged Exec
Link State ID Router ID of the router that originated the LSA
Advertising
Router
Advertising router ID
LS Sequence
Number
Sequence number of LSA (used to detect older
duplicate LSAs)
LS Checksum Checksum of the complete contents of the LSA
Length The length of the LSA in bytes
Network Mask Destination network’s IP address mask
Metrics Cost of the link
Field Description
To Next Page
Loading...
