Ericsson ECN330 - Show Interfaces Switchport

Command Line Interface
7531553-KDU 137 365 Uen D 2006-06-16
7.9.13 show interfaces switchport
This command displays the administrative and operational status of the
specified interfaces.
Syntax
show interfaces switchport [interface]
interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330 (Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.