Ericsson ECN330 - Show Ip Ospf Database

Command Line Interface
10851553-KDU 137 365 Uen D 2006-06-16
Table 134 show ip ospf border-routers - Display Description
7.26.43 show ip ospf database
This command shows information about different OSPF Link State
Advertisements (LSAs) stored in this router’s database.
Syntax
show ip ospf [area-id] database [adv-router [ip-
address]]
show ip ospf [area-id] database [asbr-summary] [link-
state-id]
show ip ospf [area-id] database [asbr-summary] [link-
state-id] [adv-router [ip-address]]
show ip ospf [area-id] database [asbr-summary] [link-
state-id] [self-originate] [link-state-id]
show ip ospf [area-id] database [database-summary]
show ip ospf [area-id] database [external] [link-state-
id]
Field Description
Destination Identifier for the destination router
Next Hop IP address of the next hop toward the destination
Cost Link metric for this route
Type Router type of the destination; either ABR, ASBR or both
RteType Route type; either intra-area or interarea route (INTRA or
INTER)
Area The area from which this route was learned
SPF No The number of times the shortest path first algorithm has
been executed for this route