Ericsson ECN330 - Dhcp Relay; Ip Dhcp Restart Relay

Command Line Interface
9771553-KDU 137 365 Uen D 2006-06-16
Related Commands
ip address (section 7.25.1 on page 1016)
DHCP Relay
Use the commands in this section to configure the ECN330-switch to relay
DHCP requests from local hosts to a remote DHCP server.
Table 116 DHCP Relay Commands
7.23.3 ip dhcp restart relay
This command enables DHCP relay for the specified VLAN. Use the no form to
disable it.
Syntax
[no] ip dhcp relay
Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)
Command Function Mode Page
ip dhcp restart
relay
Enables DHCP relay agent IC 977
ip dhcp relay
server
Specifies DHCP server addresses for relay IC 979