Command Line Interface
5491553-KDU 137 365 Uen D 2006-06-16
Command Usage
• For a description of the items shown by this command, refer to section
6.3.1 on page 69.
• The POST results should all display PASS.
Example
7.5.5 show users
This command shows all active console and Telnet sessions, including user
name, idle time, and IP address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#show system
System Description: ECN330; SW version: CXC 132 8902 V1.2;
System OID String: 1.3.6.1.4.1.193.72.1400
System Information
System Up Time: 0 days, 1 hours, 3 minutes, and 39.29
seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC Address (Unit1): 00-00-12-33-89-76
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST Result:
Console#
To Next Page
Loading...
