Ericsson ECN330 - Web Server Commands

Command Line Interface
6491553-KDU 137 365 Uen D 2006-06-16
Example
Web Server Commands
This section describes commands used to configure web browser management
access to the ECN330-switch.
Table 59 Web Server Commands
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with TACACS server: *****
Server port number: 49
Console#
Command Function Mode Page
ip http port Specifies the port to be used by the web browser
interface
GC 650
ip http server Allows the ECN330-switch to be monitored or
configured from a browser
GC 650
ip http
secure-server
Enables HTTPS/SSL for encrypted communications GC 651
ip http
secure-port
Specifies the UDP port number for HTTPS/SSL GC 653