Command Line Interface
6331553-KDU 137 365 Uen D 2006-06-16
User Account Commands
The basic commands required for management access are listed in this section.
The ECN330-switch also includes other options for password checking through
the console or a Telnet connection, user authentication through a remote
authentication server (page 608), and host access authentication for specific
ports (page 674).
Table 55 User Access Commands
7.7.1 username
This command adds named users, require authentication at login, specify or
change a user's password (or specify that no password is required), or specify
or change a user's access level. Use the no form to remove a user name.
Syntax
username <name> {access-level <level> | nopassword |
password {0 | 7} <password>}
no username <name>
• name - The name of the user. (Maximum length: 8 characters, case
sensitive. Maximum users: 16)
• access-level <level> - Specifies the user level.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec. All other privilege levels are
currently reserved for future use.
• nopassword - No password is required for this user to log in.
• {0 | 7} - 0 means plain password, 7 means encrypted password.
Command Function Mode Page
username Establishes a user name-based authentication
system at login
GC 633
enable password Sets a password to control access to various
Privileged Exec levels
GC 635
To Next Page
Loading...
