Ericsson ECN330 - Show Interfaces Status

Command Line Interface
7491553-KDU 137 365 Uen D 2006-06-16
7.9.11 show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330 (Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
• vlan <vlan-id> (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
• If no interface is specified, information on all interfaces is displayed.
• For a description of the items displayed by this command, see
“Displaying Connection Status” on page 184.