Command Line Interface
8551553-KDU 137 365 Uen D 2006-06-16
Configuring VLAN Interfaces
This section describes commands used to configure VLAN interfaces on the
ECN330-switch.
Table 92 Commands for Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for a
specified VLAN
IC 856
switchport mode Configures VLAN membership mode for an
interface
IC 857
switchport
acceptable-
frame-types
Configures frame types to be accepted by an
interface
IC 858
switchport
ingress-
filtering
Enables ingress filtering on an interface IC 859
switchport native
vlan
Configures the PVID (native VLAN) of an
interface
IC 860
switchport
allowed vlan
Configures the VLANs associated with an
interface
IC 861
switchport gvrp Enables GVRP for an interface IC 844
switchport
forbidden vlan
Configures forbidden VLANs for an interface IC 863
mac-address Configures the MAC address of a VLAN IC 864