Ericsson ECN330 - Static Multicast Routing Commands

Command Line Interface
9491553-KDU 137 365 Uen D 2006-06-16
Example
The following shows how to configure the default timeout to 300 seconds:
Related Commands
ip igmp snooping version (section 7.21.4 on page 939)
Static Multicast Routing Commands
This section describes commands used to configure static multicast routing on
the ECN330-switch.
Table 109 Static Multicast Routing Commands
Console(config)#ip igmp snooping query-time-out 300
Console(config)#
Command Function Mode Page
ip igmp snooping
vlan mrouter
Adds a multicast router port GC 950
show ip igmp
snooping mrouter
Shows multicast router ports PE 951