Ericsson ECN330 - System Mode Commands

Command Line Interface
5511553-KDU 137 365 Uen D 2006-06-16
Command Usage
See section 6.3.5 on page 75 for detailed information on the items displayed
by this command.
Example
System Mode Commands
This section describes command used to configure the ECN330-switch to
operate in normal mode, QinQ mode, or L2MPLS mode.
Table 37 System Mode Commands
Console#show version
Unit1
Serial Number: A422000632
Hardware Version: R0B
EPLD Version: 1.02
Number of Ports: 28
Main Power Status: Up
Agent (Master)
Unit ID: 1
Loader Version: 1.1
Boot ROM Version: 1.0
Operation Code Version: 1.2
Console#
Command Function Mode Page
system mode Configures the ECN330-switch to operate in normal
mode, QinQ mode, or L2MPLS mode
PE 552
show system
mode
Displays the ECN330-switch system mode PE 553