Command Line Interface
748 1553-KDU 137 365 Uen D 2006-06-16
7.9.10 clear counters
This command clears statistics on an interface.
Syntax
clear counters <interface>
interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330 (Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the base
value for displayed statistics to zero for the current management session.
However, by logging out and back into the management interface, the
statistics displayed show the absolute values accumulated since the last
power reset.
Example
The following example clears statistics on Ethernet port 1/1.
Console#clear counters ethernet 1/1
Console#
To Next Page
Loading...
