Command Line Interface
5351553-KDU 137 365 Uen D 2006-06-16
Command Usage
The history buffer size is fixed at 10 Execution commands and
10 Configuration commands.
Example
In this example, the show history command lists the contents of the command
history buffer:
The ! command repeats commands from the Execution command history buffer
when in Normal Exec or Privileged Exec Mode, and commands from the
Configuration command history buffer when in any of the configuration modes.
In this example, the !2 command repeats the second command in the Execution
history buffer (config).
7.4.5 reload
This command restarts the system.
Note: When the system is restarted, it always runs the Power-On Self-Test.
It also retains all configuration information stored in non-volatile memory by the
copy running-config startup-config command.
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
Console#!2
Console#config
Console(config)#
To Next Page
Loading...
