Command Line Interface
10391553-KDU 137 365 Uen D 2006-06-16
• These timers must be set to the same values for all routers in the
network.
Example
This example sets the update timer to 40 seconds. The timeout timer is
subsequently set to 240 seconds, and the garbage-collection timer to 160
seconds.
7.26.9 network
This command specifies the network interfaces that will be included in the RIP
routing process. Use the no form to remove an entry.
Syntax
[no] network <subnet-address>
subnet-address – IP address of a network directly connected to this
router.
Command Mode
Router Configuration
Default Setting
No networks are specified.
Command Usage
• RIP only sends updates to interfaces specified by this command.
Console(config-router)#timers basic 15
Console(config-router)#
To Next Page
Loading...
