Command Line Interface
10651553-KDU 137 365 Uen D 2006-06-16
Default Setting
redistribution - none
protocol - RIP and static
metric-value - 0
type-metric - 2
Command Usage
• This router supports redistribution for both RIP and static routes.
• When external routes are redistributed into an OSPF autonomous
system (AS), the router automatically becomes an autonomous system
boundary router (ASBR). If the redistribute command is used in
conjunction with the default-information originate command
to generate a “default” external route into the AS, the metric value
specified in this command supersedes the metric specified in the
default-information originate command.
• Metric type specifies the way to advertise routes to destinations outside
the AS through External LSAs. Specify Type 1 to add the internal cost
metric to the external route metric. In other words, the cost of the route
from any router within the AS is equal to the cost associated with
reaching the advertising ASBR, plus the cost of the external route.
Specify Type 2 to only advertise the external route metric.
Example
This example redistributes routes learned from RIP as Type 1 external routes.
Related Commands
default-information originate (section 7.26.22 on page 1058)
Console(config-router)#redistribute rip metric-type 1
Console(config-router)#
To Next Page
Loading...
