Ericsson ECN330 - Page 125

Configuring the ECN330-switch
1191553-KDU 137 365 Uen D 2006-06-16
• Security Model – The user security model; SNMP v1, v2c or v3.
(Default: v1)
• Security Level – The security level used for the user:
• noAuthNoPriv – There is no authentication or encryption used in
SNMP communications. (This is the default for SNMPv3.)
• AuthNoPriv – SNMP communications use authentication, but the
data is not encrypted (only available for the SNMPv3 security
model).
• AuthPriv – SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
• Authentication Protocol – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
• Authentication Password – A minimum of eight plain text characters
is required.
• Privacy Protocol – The encryption algorithm use for data privacy; only
56-bit DES is currently available.
• Privacy Password – A minimum of eight plain text characters is
required.