Configuring the ECN330-switch
1271553-KDU 137 365 Uen D 2006-06-16
• Password – Specifies the user password.
(Range: 0-8 characters plain text, case sensitive)
• Change Password – Sets a new password for the specified user.
Web – Click Security, User Accounts. To configure a new user account, enter the
user name, access level, and password, then click Add. To change the password
for a specific user, enter the user name and new password, confirm the
password by entering it again, then click Apply.
Figure 42 User Accounts
CLI – Assign a user name to access-level 15 (that is, administrator), then specify
the password.
Console(config)#username bob access-level 15
Console(config)#username bob password 0 smith
Console(config)#
To Next Page
Loading...
