Ericsson ECN330 - Page 153

Configuring the ECN330-switch
1471553-KDU 137 365 Uen D 2006-06-16
6.5.6.1 Displaying 802.1X Global Settings
The 802.1X protocol provides port authentication.
Command Attributes
• 802.1X System Authentication Control – The global setting for
802.1X.
Web – Click 802.1X, Information.
Figure 50 802.1X Global Information
CLI – This example shows the default global setting for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
802.1X Port Details
802.1X is disabled on port 1/1
.
.
.
802.1X is disabled on port 28
Console#