Introduction to the ECN330-switch
151553-KDU 137 365 Uen D 2006-06-16
• Wire-speed performance when switching for intra-VLAN traffic at Layer
2 or routing for inter-VLAN traffic at Layer 3
• Supports flow control, using back pressure for half duplex and IEEE
802.3x for full duplex
• Broadcast storm control
• The ECN330-switch supports up to 4094 tagged Service VLANs
(VLANs used for End-user traffic) based on the IEEE 802.1Q standard.
• Multicast Switching based on IGMP Snooping
• Link redundancy supported with Multiple Spanning Tree (MSTP)
• Link aggregation by utilizing LACP
• Layer 2 tunneling with QinQ or L2MPLS
• EAPS for increased availability of Ethernet rings
• Layer 2, 3 and 4 port priority settings, plus Differentiated Services
2.5.4 Management
• “At-a-glance” LEDs for easy troubleshooting
• Network management agent:
• Manages ECN330-switch in-band or out-of-band
• Supports Telnet, SSH, SNMP/RMON and web-based interface
To Next Page
