Configuring the ECN330-switch
208 1553-KDU 137 365 Uen D 2006-06-16
Command Attributes
• Port – Port number. (Port Broadcast Control)
• Trunk – Trunk number. (Trunk Broadcast Control)
• Type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
• Protect Status – Shows whether or not broadcast storm control has
been enabled. (Default: Enabled)
• Threshold – Threshold as percentage of port bandwidth. (Options:
500-262143 packets per second; Default: 500 packets per second)
• Trunk – Shows if port is a trunk member. (Port Broadcast Control)
Web – Click Port, Port Broadcast Control. Set the threshold any port, click Apply.
Figure 78 Port Broadcast Control
To Next Page
Loading...
