Configuring the ECN330-switch
210 1553-KDU 137 365 Uen D 2006-06-16
Command Usage
• Monitor port speed should match or exceed source port speed,
otherwise traffic may be dropped from the monitor port.
• All mirror sessions have to share the same destination port.
• When mirroring port traffic, the target port must be included in the same
VLAN as the source port.
Command Attributes
• Mirror Sessions – Displays a list of current mirror sessions.
• Source Port – The port whose traffic will be monitored. (Range: 1-28)
• Type – Selects which traffic to mirror to the target port. (Options: Rx, Tx,
Both; Default: Both)
• Target Port – The port that will “duplicate” or “mirror” the traffic on the
source port. (Range: 1-28)
Web – Click Port, Mirror Port Configuration. Specify the source port, the traffic
type to be mirrored, and the monitor port, then click Add.
Figure 80 Mirror Port Configuration
To Next Page
Loading...
