Configuring the ECN330-switch
2231553-KDU 137 365 Uen D 2006-06-16
6.8.2 Setting the ECN330-switch Power Budget
A maximum PoE power budget for the ECN330-switch (power available to all
ECN330 ports) can be defined so that power can be centrally managed,
preventing overload conditions at the power source. If the power demand from
devices connected to the ECN330 exceeds the power budget setting, the
ECN330-switch uses port power priority settings to limit the supplied power.
Command Attributes
• Power Allocation – The power budget for the ECN330. If devices
connected to the ECN330 require more power than the ECN330-switch
budget, the port power priority settings are used to control the supplied
power. (Range: 36 - 800 watts; Default: 555 Watts)
Web – Click PoE, Power Config. Specify the desired power budget for the
ECN330-switch. Click Apply.
Figure 85 Setting the ECN330-switch Power Budget
CLI – Use the power mainpower maximum allocation command to set
the PoE power budget for the ECN330.
Console(config)#power mainpower maximum allocation 200
Console(config)#
To Next Page
Loading...
