Ericsson ECN330 - Page 243

Configuring the ECN330-switch
2371553-KDU 137 365 Uen D 2006-06-16
CLI – This command displays global STA settings, followed by settings for each
port
.
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode :RSTP
Spanning tree enable/disable :enable
Instance :0
Vlans configuration :1-4094
Priority :32768
Bridge Hello Time (sec.) :2
Bridge Max Age (sec.) :20
Bridge Forward Delay (sec.) :15
Root Hello Time (sec.) :2
Root Max Age (sec.) :20
Root Forward Delay (sec.) :15
Max hops :20
Remaining hops :20
Designated Root :32768.0.0000ABCD0000
Current root port :1
Current root cost :200000
Number of topology changes :1
Last topology changes time (sec.):13380
Transmission limit :3
Path Cost Method :long
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status : enable
Role : disable
State : discarding
External path cost : 10000
Internal path cost : 10000
Priority : 128
Designated cost : 5000
Designated port : 128.1
Designated root: 32768.0.0000E8AAAA00
Designated bridge: 32768.0.0030F18FD550
Fast forwarding : disable
Forward transitions : 0
Admin edge port : disable
Oper edge port : disable
Admin Link type : auto
Oper Link type : point-to-point
Spanning Tree Status : enable
.
.
.