Configuring the ECN330-switch
2811553-KDU 137 365 Uen D 2006-06-16
done in the SBC. (Default VID: 249; Default Members: 1-24,28
tagged)
• VLAN ID – The VLAN ID of the management VLAN. If the field is blank
or zero, no VLAN is defined for the corresponding management VLAN
on the ECN330-switch. (Range: 0-4094; Default: Internal - 247,
Dynamic - 248, External - 246, Native - 4093, FSA - 249)
Web – Click VLAN, 802.1Q VLAN, Basic Information.Create an new
management VLAN as described under Command Usage in this section, enter
the VLAN ID for the new management VLAN, and click Apply.
Figure 111 Configuring Management VLANs
To Next Page
Loading...
