Configuring the ECN330-switch
3711553-KDU 137 365 Uen D 2006-06-16
Command Attributes
• Domain Lookup Status – Enables DNS host name-to-address
translation.
• Default Domain Name – Defines the default domain name appended
to incomplete host names. (Range: 1-64 alphanumeric characters)
• Domain Name List – Defines define a list of domain names that can be
appended to incomplete host names. (Range: 1-64 alphanumeric
characters. 1-5 names)
• Name Server List – Specifies the address of one or more domain name
servers to use for name-to-address resolution. (Range: 1-6 IP
addresses)
Note: When specifying names, do not include the initial dot that separates
the host name from the domain name.
Web – Select DNS, General Configuration. Set the default domain name or list
of domain names, specify one or more name servers to use to use for address
resolution, enable domain lookup status, and click Apply.
Figure 154 DNS General Configuration
To Next Page
Loading...
