Configuring the ECN330-switch
384 1553-KDU 137 365 Uen D 2006-06-16
Configuring a Network Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for
any entry. Click the radio button for “Network.” Enter the IP address and subnet
mask for the network pool. Configure the optional parameters such as gateway
server and DNS server. Then click Apply.
Figure 162 DHCP Server Pool - Network Configuration
CLI
– This example configures a network address pool.
Console(config)#ip dhcp pool tps
Console(config-dhcp)#network 10.1.0.0 255.255.255.0
Console(config-dhcp)#default-router 10.1.0.253
Console(config-dhcp)#dns-server 10.2.3.4
Console(config-dhcp)#netbios-name-server 10.1.0.33
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#domain-name example.com
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#lease infinite
Console(config-dhcp)#
To Next Page
Loading...
