Configuring the ECN330-switch
4451553-KDU 137 365 Uen D 2006-06-16
the default route for destinations external to the local area or the AS,
the stub will become completely isolated.
Note: This router supports up to 16 total areas (either normal transit areas,
stubs, or NSSAs).
Web - Click Routing Protocol, OSPF, Area Configuration. Set any area to a stub
or NSSA as required, specify the cost for the default summary route sent into a
stub, and click Apply.
Figure 199 OSPF Area Configuration
To Next Page
Loading...
