Configuring the ECN330-switch
4591553-KDU 137 365 Uen D 2006-06-16
Command Attributes
• IP Address – Summary address covering a range of addresses.
• Netmask – Network mask for the summary route.
Note: This router supports up 16 Type-5 summary routes.
Web - Click Routing Protocol, OSPF, Summary Address Configuration. Specify
the base address and network mask, then click Add.
Figure 207 OSPF Summary Address Configuration
CLI - This example This example creates a summary address for all routes
contained in 192.168.x.x.
Console(config-router)#summary-address 192.168.0.0 255.255.0.0
Console(config-router)#
To Next Page
Loading...
