Configuring the ECN330-switch
468 1553-KDU 137 365 Uen D 2006-06-16
Identification flags include:
• D – Dynamic neighbor
• S – Static neighbor
• DR – Designated router
• BDR – Backup designated router
• Address – IP address of this interface.
Web - Click Routing Protocol, OSPF, Neighbor Information.
Figure 213 OSPF Neighbor Information
CLI - This shows a designated router and backup designated router as
neighbors.
Console#show ip ospf neighbor
ID Pri State Address
--------------- ------ ---------------- ---------------
10.2.44.5 1 FULL/DR 10.2.44.88
10.2.44.6 2 FULL/BDR 10.2.44.88
Console#
To Next Page
Loading...
