Configuring the ECN330-switch
496 1553-KDU 137 365 Uen D 2006-06-16
CLI – This example sets the PIM-SM global parameters.
Console(config)#ip pim ignore-rp-set-priority
Console(config)#ip pim crp-prefix
Console(config)#ip pim register-checksum-withdata
Console(config)#ip pim jp-interval 80
Console(config)#ip pim register-rate-limit 500
Console(config)#ip pim register-suppression 500
Console(config)#ip pim spt-threshold infinity 224.1.0.0 255.255.0.0
Console#show ip pim
PIM-DM Admin Status: Disabled
PIM-SM Admin Status: Enabled
Join/Prune-Interval: 80
Register-Suppression: 500
Register-Rate-Limit: 500
Register-CheckSum-with Data: Enabled
Ignore RP-Set-Priority: Enabled
CRP-Prefix: Enabled
SPT-Threshold: Enabled
SPT-Threshold Group: 224.1.0.0
SPT-Threshold Group mask: 255.255.0.0
Console#show running-config
.
.
.
!
router pim sparse-mode
ip pim register-rate-limit 500
ip pim rp-candidate vlan 1 224.0.0.0 255.0.0.0 priority 200
ip pim bsr-candidate vlan 1 hash-mask-length 20 priority 200
ip pim rp-address 10.1.1.1 224.1.0.0 255.255.0.0
ip pim rp-address 192.168.1.1 224.0.0.0 240.0.0.0
!
.
.
.
Console#
To Next Page
Loading...
