Command Line Interface
522 1553-KDU 137 365 Uen D 2006-06-16
Table 29 Command Classes and Modes
7.2.9 Exec Commands
If the system is in Normal Exec command mode (or guest mode), displaying the
Console> command prompt, only a limited number of the commands are
available. All commands can only be accessed from the Privileged Exec
command mode (or administrator mode). To access Privilege Exec mode, open
a console session with the default user name and password admin. The system
displays the Console# command prompt. Privileged Exec mode can also be
entered from within Normal Exec mode, by typing the enable command,
followed by the privileged level password super (see section 7.4.1 on page
532).
Class Mode
Exec Normal
Privileged
Configuration Global* Access Control List
Class Map
DHCP
EAPS
Interface
Line
Multiple Spanning Tree
Policy Map
Router
VLAN Database
* Access to Privileged Exec mode is required to access any of the
configuration modes. Access to Global Configuration mode is required to
access any of the other configuration modes.
To Next Page
Loading...
