Command Line Interface
5371553-KDU 137 365 Uen D 2006-06-16
Example
7.4.7 end
This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration
Example
This example shows how to return to the Privileged Exec mode from the
Interface Configuration mode:
7.4.8 exit
This command returns to the previous configuration mode or exit the
configuration program.
Default Setting
None
Console(config)#prompt
(config)#
Console(config-if)#end
Console#
To Next Page
Loading...
